Description
Specification
| Rim | |
| Series | Marvel |
| Rim Type | Tubeless Compatible |
| Rim Depth | 38/50/60/82mm |
| Inner Width | 17-18.5mm |
| Outer Width | 28mm |
| Spoke | |
| Front Spoke Pattern | Radial |
| Rear Spoke Pattern | Radial/Two-cross |
| Spoke Count | 18F/21R |
| Spoke Type | Pillar pa 1423 |
| Nipple Type | Sapim Secure Lock |
| Hub | |
| Front Hub | QR*100mm ceramic bearing |
| Rear Hub | QR*130mm ceramic bearing |
| Brake Interface | Rim brake |
| Freebody Type | 4 pawls |
| Cassette Body | Shimano |
| Other | |
| Assembly Method | Handbuilt |
| Extras | QR/ Brake Pads/ Rim Tape |
| Tyre Pressure | 120psi recommended max |
| System Weight Limit | 275lbs / 125kg |
| Recommended Tyre Sizes | 700*25C-700*33C |
Weight(pair)
| 38mm | 1505g±30g |
| 50mm | 1595g±30g |
| 60mm | 1685g±30g |
| 82mm | 1875g±30g |
FEATURE:
Marvel is the most representative wheel set of Elitewheels, which can meet your competition needs with the least budget. Marvel has a highly balanced rigid adjustment that can meet the comfort of daily riding, and is also capable of long-term sawing and sprinting at critical moments. A variety of rim sizes with different heights are available. Climbing, breaking the wind, triathlon and more.
The Marvel standard is matched with ceramic bearing, and the high-moisturizing ceramic bearing can also save you more energy.
If your budget is limited, then Marvel is your best wheel choice.
RIMS
RIMS
Marvel has 38mm, 50mm, 60mm, 82mm and other different width wheel options. You can also choose different widths of front and rear wheels. The standard is equipped with Pillar pa 1423 spokes, and it can also be upgraded to sapim cx. ray spokes. All Marvel wheels can use clincher tires and are compatible with tubeless tires. 700*25C-28C tires are recommended.
Brake surface
BRAKE SURFACE
The brake surface uses a mixture of 270 degrees Celsius high temperature resin and T800 material, and also adds a drain groove, regardless of dry weather or wet weather, the performance of the brake side has a good performance guaranteed braking distance on slippery roads.
Hub
HUB
The Marvel hub is processed by the Elitewheels factory itself. The front and rear hubs are all processed with forged blanks, and use FANUC five-axis CNC processing equipment from Japan. The improvement of processing accuracy can reduce the friction of the bearing and minimize the rolling resistance.
The flange distance of the front hub is also increased to 78mm to the maximum, which makes the center of gravity of the front wheels more centered, therefore it can give the front wheels a good balance and make it easier to control the accurate angle when cornering at high speed.
The rear hub puts more focus on the power transmission on the drive side. The power loss value of the 14 spokes on the drive side and the tower base 4pawls is the best combination.
Spokes
SPOKES
The spokes of Aero pa 1423 are the strongest in the pillar. They are also AERO SPOKE. Compared with other spokes, under the same tension, the deformation of PA 1423 is the smallest, which means that PA 1423 can meet higher spoke tension need.
At the same time, the Marvel rear-wheel drive side spoke weaving 2X cross, the inner and outer spokes superimposed on the drive side spoke tension increased by 15%, the use of 14 spokes on the drive side, also greatly improved the power transmission efficiency value.
Rim type
RIM TYPE
All Elitewheels are tubeless compatible.We design a R angle,The rounded edge makes tire installation easier and offers increased support during hard cornering with a softer edge and larger surface area..
Bearings
BEARINGS
Both the front and rear hubs of the Marvel use ceramic bearings, the outer wall steel frame, and the built-in ceramic balls. The shaft center and hub shell with ultra-high machining accuracy maximize the rolling coefficient of the ceramic bearing.
Reviews
There are no reviews yet.